Clarion DXZ935 CD Player User Manual


 
20 DXZ935
English
Loading a CD
1. Press the [O] button. The DUAL ACTION
opens.
CD Operations
CAUTION
Be careful not to get your fingers caught
when opening and closing the DUAL AC-
TION.
2. Press the [CD EJECT] button.
3. Insert a CD into the centre of the insertion
slot with the label side facing up. The CD
plays automatically after loading.
Notes:
Never insert foreign objects into the CD insertion
slot.
If the CD is not inserted easily, there may be an-
other CD in the mechanism or the unit may re-
quire service.
Discs not bearing the or mark and
CD-ROMs cannot be played by this unit.
Loading 8 cm compact discs
No adapter is required to play an 8 cm CD.
Insert the 8 cm CD into the centre of the inser-
tion slot.
4. After loading a CD, the DUAL ACTION
closes automatically.
Notes:
Note that DUAL ACTION closes immediately after
a CD is inserted into CD insertion slot.
If no CD is loaded in the DUAL ACTION, it closes
after 30 seconds.
Listening to a CD already inserted
Press the [FNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, NO DISC appears in the display.
Pausing play
1. Press the [ ] button to pause play.
PAUSE appears in the display.
2. To resume CD play, press the [ ] button
again.
Ejecting a CD
1. Press the [O] button. The DUAL ACTION
opens. Press the [CD EJECT] button to eject
a CD. EJECT appears in the display.
CAUTION
Be careful not to get your fingers caught
when opening and closing the DUAL AC-
TION.
2. Remove the CD and press the [O] button to
close the DUAL ACTION.
Notes:
Be sure to close the DUAL ACTION after remov-
ing the CD.
The DUAL ACTION closes automatically 30 sec-
onds after removing the CD.
If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded.
(Auto reload)
8 cm CDs are not auto reloaded. Be sure to re-
move it when ejected.
f you force a CD into before auto reloading, this
can damage the CD.
When it fails in eject operation when the eject but-
ton is pressed down, fully press the eject button
down again. (If the eject button operation is in-
complete, it means that the Dual Action Mecha-
nism is suspended, so do not perform other fur-
ther operation without releasing the Dual Action
Mechanism stopped midway.)
Selecting a track
Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
Fast-forward
Press and hold the [d] button for 1 second or
longer.
Fast-backward
Press and hold the [a] button for 1 second or
longer.