Filter
Top Products
DXZ935 17
English
DIFFUSE (Adjusts the correction
deviation of broadness)
CAR WIDTH (Adjusts the correction
deviation of width inside
the car)
CAR LENG (Adjusts the correction
deviation of length inside
the car)
Adjusting AC-P
II
STD
AC-PII STD makes natural stereo feeling for ev-
ery seat by virtual space enhancer.
VSE, which is room simulation, can correct the
sound pressure inside the car so that the uni-
form sound effect is obtained at any seats.
1. Select “VSE” menu which you want to edit on
the basis of.
2. Press and hold the [TITLE] button for 1 sec-
ond or longer.
3. Press the [a] or [d] button to select item
to be adjusted.
There are “DIFFUSE”, “CAR WIDTH” and
“CAR LENG” available for the items to be
adjusted.
AC-Processor
II
Operations
5. Press and hold the [VSE] button for 1 second
or longer so that the POSITION effect is
turned on or off.
Adjusting AC-P
II
PRO
1. Select “VSE” menu which you want to edit on
the basis of.
2. Press and hold the [TITLE] button for 1 sec-
ond or longer.
3. Press the [a] or [d] button to select item
to be adjusted.
∗ There are “TIME ALIGN” and “SP GAIN” avail-
able for the items to be adjusted.
4. Press the [ ].
5. Press the [a] or [d] button to select the
channel to be adjusted. Available channels
are: “FRONT-L”, “FRONT-R”, “REAR-L”,
“REAR-R”, “SW-L” and “SW-R”.
6. Turn the [ROTARY] knob clockwise or coun-
terclockwise to make the adjustment.
The adjustment of “TIME ALIGN” range is
from 0 cm to 500cm.
The adjustment of “SP-GAIN” range is from
0db to -20dB for each channel.
7. Press and hold the [DIRECT] buttons for 2
seconds or longer to store the edited con-
tents.
∗ You can give a title to user memory. For the in-
putting method of titles, refer to the subsection
“Entering titles” in section “Operations com-
mon to each mode”.
EQ Operation
There are 2 mode for sound EQ “P.EQ” mode
and “BASS/TREB” mode selecting EQUALIZ-
ING mode.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer and enter “ADJ” mode.
2. Press the [a] or [d] button to select the
“AC-PII SEL”.
3. Press the [ ] button to enter AC-ProII se-
lect mode “STD” or “PRO”.
4. Then press the [a] or [d] button to select
the “EQ SEL”.
5. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select “P.EQ” or “BAS/TREB”
mode.
6. Press the [TITLE] button to return to the pre-
vious mode.
∗ (Factory default setting is P.EQ)
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise to make the adjustment.
The adjustment range is from 1 to 10 for
each item.
5. Press and hold the [DIRECT] buttons for 2
seconds or longer to store the edited con-
tents.
∗ You can give a title to user memory. For the in-
putting method of titles, refer to the subsection
“Entering titles” in section “Operations com-
mon to each mode”.
Operation AC-P
II
PRO
Arrival time of sound from the speaker can be
selected from among five types according to the
position of the seat. In addition, Time Alignment
Function enables a pinpoint speaker setting to
obtain a uniform sound effect from speakers to
the listner.
1.
Press the [VSE] button to enter POSITION mode.
2.
Press the Band button to select “POS BASIC”.
3. Press the [DIRECT] button to select VSE
menu as below.
1.FRONT-L, 2.FRONT-R, 3.FRONT,
4.REAR, 5.FULL SEAT
4. Press the [VSE] button to return to the previ-
ous mode.