Filter
Top Products
E-63
Charging the Battery Pack
(charging the lithium-ion battery pack separately)
1 Set the power switch of the Cradle-type
Battery Charger to the ON position. The
power indicator of the Cradle-type Battery
Charger lights red.
2 Load a battery pack in the spare battery
compartment on the charger, making sure
that the terminals on the side and rear of the
battery pack come into close contact with the
battery pack charge terminals.
The battery pack charge indicator ("CHG 2")
lights red, and charging is started.
Battery Pack Charge Indicator ("CHG 2")
Lit Red: Charging (charging
standing by when the
battery in the Handheld
Terminal is charging)
OFF: No battery pack
(DT-923LIB) installed.
Lit Green: Charging complete
• When the battery pack charge indicator lights red and then goes out after several
seconds, this indicates a battery pack problem.
• Charging simultaneously both the battery packs in the Handheld Terminal and in the
spare battery compartment cannot be performed. Charging the battery pack in the
Handheld Terminal is given its precedence.
Battery pack
Power
switch (ON)
Battery Pack Charge Indicator
(“CHG 1”)
Spare Battery Pack Charge
Indicator (“CHG 2”)
Power indicator