Filter
Top Products
E-51
3 Connect the power cord to the AC adaptor
before connecting the power cord to the
power outlet.
4 After making sure that the power switch of the
Satellite Cradle is in the OFF position, plug
the other end of the AC adaptor into the AC
terminal at the top of the Satellite Cradle.
5 After making sure that the power of the
Satellite Cradle and personal computer is
OFF, remove the cover and connect one end
of the optional RS-232C cable (DT- 881RSC,
DT-882RSC, DT-883RSC, DT- 887AX/AXA) to
the RS-232C connector at the top of the
Satellite Cradle. Connect the other end of the
cable to the computer’s RS- 232C connector.
When the RS-232C connector is not used,
attach the cover.
6 Turn on the Satellite Cradle. The power
indicator on the Satellite Cradle lights red.
7 Attach the Handheld Terminal to the
communication port, making sure that the
infrared ports on its base come into close
contact with each other. The color of the
Satellite Cradle power indicator changes to
green when a proper connection is made.
• The system operation indicator lights green
when system operation is normal and the
Satellite Cradle is performing or standing
by for the communication with another
Handheld Terminal connected to a Satellite
Cradle.
• The communication indicator flashes green
when communication starts.
Infrared port
Power
switch (ON)
System operation indicator
Communication indicator
Power indicator
Spare battery pack charge
indicator (“CHG 2”)
Power
switch (OFF)
To electrical outlet
Battery pack charge indicator
(“CHG 1”)