Filter
Top Products
E-22
Power Supply
Loading and Removing the Lithium-ion Battery Pack
Loading the Lithium-ion Battery Pack
1 Slide the main battery compartment cover
lock to the FREE position and remove the
cover.
2 Load a lithium-ion battery pack into the main
battery compartment in the direction shown in
the figure.
Load the battery while sliding it in with the ▲
mark on the lithium-ion battery pack aligned
with the ▼ mark in the main battery
compartment.
3 Attach the battery compartment cover to the
Handheld Terminal and slide the main battery
compartment cover lock to the LOCK position.
Removing the Lithium-ion Battery Pack
Remove the lithium-ion battery pack following the loading procedure in reverse.
Be sure to turn the Handheld Terminal OFF before you do this.