Filter
Top Products
64
Clock - time
The unit has an internal clock which is set
automatically through RDS for absolute ac-
curacy.
A condition for correction by RDS is that an
RDS transmitter with CT function (CT = clock
time) is being received.
Automatic correction of the time can be de-
activated.
Setting the time
a) Automatically:
The time is set automatically when an
RDS transmitter with the “CT” (clock
time) function is being received.
b) Manually by means of
DSC-CLOCKSET
• Press DSC briefly: “CLOCKSET” ap-
pears on the display.
• Press << >> to set the hours/min-
utes. The flashing area can be modi-
fied with
/ .
• After correcting the time, press ENT
briefly to save the setting.
Displaying the time
The time can be displayed in radio and CD
mode.
Radio mode:
The display can be toggled between time
and frequency band (incl. memory level in
the case of FM) as follows:
• Press DIS for approx. 2 seconds.
MiniDisc/CD changer mode:
You can select from three different display
modes:
- Track number, time
- Track number, time played
- CD name, track number (CD changer
mode only).
To toggle:
• Press DIS briefly.
Correcting the time following an
interruption to the power supply
If the unit has been isolated from the supply
voltage for a longer period, “0:00” is dis-
played when the power is reconnected.
The time is corrected automatically by RDS-
CT, but can also be adjusted manually.
The time need be adjusted manually only if
an RDS station with CT (clock time) is not
being received.
If you wish to correct the time manually, re-
fer to “Programming with DSC – CLOCK-
SET“.
Deactivating hours adjustment
Correction of the hours can be deactivated
by “CLK MAN/CLK AUTO” in the DSC menu.
The minutes continue to be corrected.
This is useful if you wish to display the time
of a different time zone, for example.
If necessary:
• Press DSC briefly and
• press
/ repeatedly until “CLK
MAN/ CLK AUTO” is displayed.
To deactivate hours correction, select << >>
“CLK MAN”.