Filter
Top Products
61
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
The track or the CD is played repeatedly until
you switch to “RPT OFF” using RPT.
TPM (Track Program Memory)
For storing and playing preferred tracks in
MiniDisc and CD changer mode. Up to 30
MiniDiscs can be managed in MiniDisc
mode and 99 CDs in CD changer mode with
a maximum of 40 tracks each. TPM is ac-
tive only in the mode in which the track pro-
gramme was stored (MiniDisc or CD chang-
er mode).
Storing tracks with TPM
A track can be stored only whilst it is being
played.
To store:
• Hold TPM down for approx. 1 second:
“TPM PROG” appears on the display.
This track has been stored.
If you wish to delete the current track only:
• Hold CLR down for approx. 2 seconds:
“TRCK CLR” appears briefly on the
display.
If you wish to delete all TPM tracks on the
MiniDisc or the CD:
• Hold CLR down for approx. 5 seconds:
“MD CLR“ or “DISC CLR” appear brief-
ly on the display (in MiniDisc mode and
CD changer mode respectively).
To delete the stored TPM tracks of all CDs
in CD changer mode:
• Hold CLR down for approx. 8 seconds:
“ALL CLR” appears on the display.
If you wish to delete TPM and CD names
simultaneously, refer to “Deleting CD name/
TPM store using DSC-UPDATE”.
Activating/deactivating TPM replay
• Press TPM briefly. The activated state
is indicated briefly on the display (TPM
ON/OFF).
If “TPM” is shown in reverse video on the
display, TPM replay is activated. All tracks
on the MiniDisc or CD which were stored in
the operating mode with TPM are played. If
SCA (Scan) is activated in addition to TPM,
only the stored tracks are sampled.
TPM replay can be switched on only if tracks
have been stored using TPM.
Clearing the TPM memory
You can clear tracks stored with TPM.
TPM tracks can be cleared with CLR only
during replay.
• Activate TPM.
“TPM” appears on the display in re-
verse video.
In this case, “CLR” appears below
TPM.
MiniDisc mode/CD changer mode