Filter
Top Products
53
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
again after it has been muted (approx.
2 seconds), and a beep is heard.
The station is now stored.
Note:
Should you store a station which has already
been stored, the corresponding station key
and the memory level flash briefly if a differ-
ent memory level is called up.
Automatically saving the strong-
est station with Travelstore
You can store the six strongest FM stations
in the current reception region automatical-
ly in the order of field strength. This function
is particularly useful on long journeys. Pro-
ceed as follows:
• Press TU: menu level 2 is displayed.
• Press TS briefly.
”T-STORE” flashes on the display.
The six strongest FM stations are automat-
ically stored on the “T” (Travelstore) memo-
ry level. If fewer than six stations can be re-
ceived, four lines appear through the mem-
ory locations which are not occupied. When
the procedure has been completed, the
strongest station (ST 1) is selected.
Stations can also be stored manually on the
Travelstore level if required (see “Storing
stations”).
Calling up stored stations
You can call up stored stations at the touch
of a button.
FM
Call up the stations directly on the selected
memory level as follows:
• Press the keys ST1 - ST6.
To call up stations on a different memory
level:
• Press NEXT until the desired memory
level is displayed, then select a stored
station with ST1 - ST6.
MW, LW
You can call up the stations on the selected
frequency band directly:
• Press the keys ST1 - ST6.
Calling up stations on the other frequency
band:
• Press NEXT: the other frequency band
is displayed. Then select the stored
stations using ST1 -ST6.
Changing the memory level (FM)
You can change between memory levels I,
II and T to store stations and retrieve them
again. The selected memory level appears
on the display.
• Press NEXT briefly and repeatedly un-
til the desired memory level appears
on the display.
Storing stations
You can store six stations on the FM band
on each memory level (I, II, T) using the sta-
tion keys ST1 - ST6.
You can also store six stations each on the
MW and LW bands. Proceed as follows:
• Press TU: menu level 2 is displayed.
• Select the frequency band using BND.
• Select a station using the rocker (auto-
matically
/ or manually << >>).
• Press the desired station key repeat-
edly until the programme can be heard
Radio operation with RDS (Radio Data System)