Filter
Top Products
54
Sampling stations with
Radio Scan
You can sample briefly the stations which
can be received on the selected frequency
band.
Radio Scan can be started only when PTY
is deactivated (“PTY” is not lit on the dis-
play).
If necessary, deactivate PTY on menu level
2 as follows:
• Press TU and disable PTY using the
PTY key.
Switching on Scan:
• Press SCA briefly.
All stations on the frequency band which can
be received are sampled briefly in turn.
“SCAN” and the flashing station name/fre-
quency appear alternately on the display.
Selecting a sampled station/deactivat-
ing Scan:
• Press SCA or one of the rocker keys
briefly.
If a station is not selected, Scan is switched
off automatically when the seek function has
passed through the complete frequency
range. The station previously selected is
played.
Sampling stored stations with
Preset Scan
You can sample stored stations briefly on
all frequency bands and on the selected FM
memory level.
Preset Scan can be started only when PTY
is disabled (“PTY” is not lit on the display).
If necessary, disable PTY on menu level 2.
Proceed as follows:
• Press TU and disable PTY using the
PTY key.
Starting Preset Scan:
• Press SCA for approx. 1 second.
All stored stations on the frequency band
which can be received are sampled briefly
in turn. “SCAN” and the flashing station
name/frequency appear alternately on the
display.
Selecting sampled stations/terminating
Preset Scan:
• Press SCA or one of the rocker keys
briefly.
Changing the sampling time
(Scan)
The sampling time can be selected between
5 and 30 seconds.
If you wish to change the duration of the
sampling time, refer to “Programming with
DSC – SCANTIME“.
Changing the sensitivity of the
seek run
You can change the sensitivity of the auto-
matic seek run.
If “lo” is displayed, seek only recognizes sta-
tions with good reception (low sensitivity).
If “lo” is not displayed, seek also recognizes
stations with poorer reception.
To adjust the sensitivity, refer to “Program-
ming with DSC – FM/AM Sens”.
Toggling between stereo and
mono (FM)
You can toggle between stereo and mono
in the DSC menu. This can be useful in are-
as where reception is critical. When the unit
is switched on, stereo is selected automati-
cally.
Radio operation with RDS (Radio Data System)