Filter
Top Products
CK1.2 Keypad
CK1.2 Keypad
The CK1.2 keypad is B&K's answer to a wall mounted user interface. The CK1.2 keypad stores IR source
codes from its expansive database built in to the PC based software. Keypad setup software can be installed
from the B&K Toolbox CD-ROM included with the CT Receiver. Keypads come default programmed to oper-
ate in the hardware zone they are physically connected to using the B&K code-set 1-2-8. An additional fea-
ture utilized by the CK1.2 is its ability to be controlled by RS-232. This allows the keypads to stay in sync with
the CT Receiver as well as allowing the user to recall zone status feedback. Status feedback for each zone
can be recalled by pressing the backlight button or by any IR Code-Set ENTER command. For more infor-
mation on programming and installation, please refer to the CK1.2 user manuals.
Three separate manuals are provided in order to aid in the keypad setup and programming. These manuals
are located in the BKcSuite PDF library. They are labeled, CK1.2 User Manual, CK1.2 Installation Manual
and CK1.2 Programming manual. Once BKcSuite has been installed, this library can be found in:
c:\ Program Files\ B&K Components Ltd.\ BKcSuite\ Documentation
MAIN
IN 6 IN 1
IN 7 IN 2
IN 8 IN 3
IN 9 IN 4
FM IN 5
PAGE 1
BK&
SBIMPLY ETTER!
61
For B&K CT product with hardware version code 2.00 or earlier, it is recommended you save your files fre-
quently. For this reason, the following warning will display when running 2.00 version code or earlier: