Filter
Top Products
CK1.2 Front Panel / Back Panel
Volume/Mute Buttons control
the level of the sound.
Change Buttons - Change to the
next channel, chapter, song or B&K
sound preset; depending on the
selected activity.
Power LED Lights up when
this Zone/Room is ON.
(Controlled by the 12V Control)
LCD Buttons -
Names on the screen
change depending on what
activity has been selected.
For example, when CD is
the activity, you’ll see the
button names change to
Play, Stop etc. so that the
source can be controlled.
Backlight Button lights the keypad
display and also recalls status
feedback for that zone. Status
feedback will display input, radio
station, volume, bass, treble and
loudness levels.
Remote Control IR Receiver
conceals an IR (Infrared) Sensor
which relays commands from hand
held IR remote control to the main
unit and components connected to
flashers.
Favorites Button
Press to display up to five pages of
your favorite radio station presets or
TV channel macros.
Page Button press to display
any additional pages of func-
tions.
Main Button
The Main button always returns
you to the Main Menu so that
you can select a new device
(activity) or turn the system on
or off.
Screen Title - Displays what Source is selected ( i.e. device or activity like “CD”
or “SAT”). “Main” indicates the Main Menu for selecting a new device or activity.
Programming Jack - Behind the Faceplate
Four tabs hold the faceplate to the keypad chassis. To remove the faceplate, simply pull the faceplate off the keypad
chassis. Once removed, the Programming Jack is revealed. Note: When testing keypad functionality, remove the program-
ming jack. The keypad will not receive RS-232 communication while the programming jack is plugged in.
Master [IN]
The RJ-45 Master [IN] is used for
the home run back to the
CT Receiver. RJ-45 termination
allows the use of CAT-5
cable to be used for keypad
installation.
Alternate Master [IN]
The alternate master operates
identically to the Master [IN].
Additionally, 12V controls or local
source emitters can be termi-
nated here. Refer to page 21 of
this manual for details.
The CK1.2 Keypad Front Panel
Slave [OUT]
Used when running multi-
ple keypads in one zone or
daisy chaining additional
zones.
BK&
SBIMPLY ETTER!
6