Filter
Top Products
Hardware Zone Settings - Tab 1
BK&
SBIMPLY ETTER!
38
1. Since a CT610/602 has six hardware
zones, BKcSuite will display a zone button
corresponding to each of the six zones. (If
you are programming a CT310/300, three
zone buttons appear). Select the zone
you wish to adjust the settings of.
2. You may set Zone A to stereo or mono
as required. When stereo is selected, the
form will appear as shown to the left.
If mono is chosen, the Zone A form will
change its appearance to the mono ver-
sion as shown to the left.
The form displays new choices for the split
mono zone. The right or left side may con-
figured fixed or variable or may have vol-
ume limits set. The changes made in the
Hardware Zone setting Tab affect amp
channels only.
1
2
2