B&K AVR202 Series Stereo Receiver User Manual


 
RECEIVER SPECIFICATIONS
5 years receiver
1 year remote
Warranty:
See Warranty page for
complete explanation
55 poundsWeight:95 dBS / N (A-weighted):
17"(w)x17"(d)x6.25"(h)Dimensions:1.4 dBDynamic headroom:
Rails - 4 Amp/250 Volt(slow blow type)
14 V/µsec
Slew rate:
Line -12 Amp/250 Volt Replacement fuses:28 AmpsCurrent (peak to peak):
31 watts standby150Damping factor:
( 9 amps @ 120 V)0.09 % @ 1 kHzTHD (S + N):
1080 watts maxPower consumption:5 Hz - 45 kHzFrequency response:
120/220/240 VACLine voltage:105 watts @ 1 kHzPower rating: 8 ohms:
MiscellaneousAmplifier Specifications
300 OhmsAntenna Input Impedance:75 OhmsAntenna Input Impedance:
70 dB, A WeightedSignal to Noise Ratio:
30 dBSelectivity:65 dBAlternate Channel Selectivity:
28 dBfSensitivity:15 / 35 dBfMono/Stereo Sensitivity:
12 dBfIHF (Usable) Sensitivity:
2 dBCapture Ratio:
28 dBfSensitivity:20 Hz - 15 kHz, +1/ -3 dBFrequency Response
Less than 0.3%Total Harmonic Distortion:Less than 0.25%Total Harmonic Distortion:
520 - 1670 kHz Frequency Range:87.5 - 107.9 MHzFrequency Range:
AM sectionTuner SpecificationsFM SectionTuner Specifications
80 Hz 24dB per octaveLow Pass Crossover
80 Hz 12dB per octaveHigh Pass Crossover
1/1Digital Outputs coax/optical
7/ 5Digital Inputs coax/optical
5Video Outputs
5Audio Analog Outputs
7Video Inputs
7Audio Analog Inputs
8Surround Outputs
-12.5 dBNoise Test Reference Level:
75 OhmsOutput Impedance:
221 OhmsOutput Impedance:
75 OhmsInput Impedance:
50 k OhmsInput Impedance:
89 dB CCIR 2 k Weighted
max level
Signal to Noise Ratio:
2 V P-PMaximum Output Level:
9 V rmsMaximum Output Level:
2 V P-PMaximum Input Level:
63 mVInput Sensitivity:
20 Hz - 10 MHz ±3dB
Frequency Response:
5 Hz - 20 kHz,
+
0/
0.5dB
Frequency Response:
Video Specifications
Audio Specifications
Specifications subject to change without notice
50
p/n 12699 Rev. 9812C