Filter
Top Products
ZONE 2 OPERATION
Via the Front Panel
You can control zone 2 from your receiver’s front panel by using the LEVEL button to step to ZONE 2. The front
panel will now control zone 2. After a few seconds of inactivity, control will return to zone 1. The SLEEP, PRESET,
ENTER, UP/DOWN ARROWS, SOURCE and VOLUME KNOBS will function exactly as for zone 1. MENU and
MODE buttons will not function in zone 2. The level button will instantly return front panel control to zone 1.
Via the Remote Control
You can set up your remote to control zone 2 instead of zone 1. Follow the instructions in the separate remote
control manual for setting the AUDIO product ID to match zone 2 (product ID 2 unless you have changed it in
ADVANCED ZONE SETTINGS). After setting your remote for zone 2 it will no longer control zone 1 until you
change it back. If you use zone 2 often you may wish to purchase an additional B&K AV 5.1 system controller (or
other compatible universal remote control) and leave it set up for zone 2. You may also wish to install a remote
repeater system to allow zone 2 control from other rooms.
Via the Menu System
You can control zone 2 from the menu system using either the front panel or zone 1 remote. Choose Zone 2
Operation from MAIN MENU. (Be sure the remote is in AUDIO mode.)
ZONE 2 OPERATION
change character
save preset
previous page
↑ ↓
SEL
MENU
PRESET 0 'Music Video '
POWER Off
SOURCE INPUT
VOLUME
TV-V3
-25 dB
0.. A9
← →
change position
change preset
MAIN MENU
1 Help / Navigate
2 Product Information
3 Zone 2 Operation
4 Edit Preset
5 User Preferences
6 Setup / Configure
move to new line
select menu page
exit menu system
↑ ↓
SEL
MENU
exit menu system MENUMENU10
return to main menu
MENUMENU9
edit more presetsrepeat 4 - 7repeat 4 - 78
save preset if desired
↵
(ENTER)
SEL or ENTER7
edit preset if desired
SLEEP
(SOURCE)
Power
source then AUDIO
VOL
∧
or
VOL
6
rename preset if desired
∧
(UP) or
∨
(DOWN)
VOLUME KNOB
(PAUSE) or
(STOP)
(REW) or
(FF)
5
recall preset
(PRESET) step to desired presetnumber or A + number4
activate ZONE 2 OPERATION
↵
(ENTER)
SEL or ENTER3
move to Zone 2 operation
∧
(UP) or
∨
(DOWN)
(PAUSE) or
(STOP)
2
activate menu system
MENUMENU1
ActionFrom Front PanelFrom Remote
40
p/n 12699 Rev. 9812C