Descriptions of each option of the advanced system setup menu are as follows:
Zone ‘1’ Home Theater - Allows adjustments for the main home theater zone. Set the max volume,
zone ID, Record loop and surround mode options.
Power On Titles - Customize power on titles for customized
personal greetings.
Control Out - Configure the 12VDC control outputs for control of
external devices.
Security Options - Lock the front panel, memory or front panel IR
sensor.
DSP Usage - Displays processor status in MIPS.
RS-232 Control Port - Configure the main RJ-45 jack for RS-232
communication.
Plug n Play Timing - Adjust the timers for the digital Plug n Play
system. This is useful when adjusting for digital error muting.
Zone ‘B’ Second zone - Allows adjustments for the second zone. Set the max volume, zone ID, Record
loop and the Zone A&B linking options.
Zone ‘1’ Home Theater
Max Level - Set the maximum volume for the main theater zone. This can be used to protect your speakers
or ears from inadvertent excessive volume.
Zone ID - The product ID (IR code set) can be adjusted if operation
with other B& K is gear is required. The default ID is 001 for the main
theater zone and 002 for Zone B. The preamplifier can be assigned to
any ID (B& K code-set) between 001 and 099. This allows ninety nine
different B&K surround processors to operate independently using
different remote controls. This feature is typically useful if multiple
surround processors are used in the same system (B& K CT whole
house audio systems). Zone A and Zone B cannot be assigned the
same code set. The code-set 000 operates both zones of the pream-
plifier simultaneously.
NOTE: If the code set of the preamplifier is changed, you will need to reprogram the IR code of the remote
control being used. B& K offers the SR10.1 programming remote (supplied with the B&K Reference 50
Series2), the CK1.2 Keypad or MZ-128 remote.
V1 Output - TAPE or LINE. The V1 output can be configured as an output for a second recording device in
Zone A (TAPE). The V1 output can also be configured as a Zone A line output to connect a second video
monitor and/or audio amplifier (LINE). As a record output, V1 will output the analog audio and video from the
selected input in Zone A except when V1 is selected. This prevents feedback through the recording device
which could damage your speakers. As a line output V1 will output the analog audio and video from whatever
input is selected in Zone A. Record/Line settings also apply to the Zone A optical and coaxial digital outputs.
Surround Modes - Select AUTO or MANUAL. Auto or manual engages or disengages the B& K Plug n Play
System.
Auto - If set to AUTO, each time an input is selected the Plug n Play system will scan the various source
signals and determine if a multi-channel digital bitstream is present. The main theater zone will then use
the maximum number of hardware speakers specified in the speaker setup menu.
Manual - If set for MANUAL, each time an input is selected, the user will select the audio mode that will
be used with the source signal, regardless of a what bitstream is present. Manual mode allows the
preferences setup in the Surround audio mode to apply both to multi-channel and 2 channel source input
signals.
33
ADVANCED MENU SYSTEM SETUP
AADDVVAANNCCEEDD SSYYSSTTEEMM SSEETTUUPP
11 ZZoonnee ‘‘11’’ HHoommee TThheeaatteerr
22 PPoowweerr OOnn TTiittlleess
33 CCoonnttrrooll OOuutt
44 SSeeccuurriittyy OOppttiioonnss
55 DDSSPP UUssaaggee
66 RRSS--223322 CCoonnttrrooll PPoorrtt
77 PPlluugg aanndd PPllaayy TTiimmiinngg
88 ZZoonnee ‘‘BB'' SSeeccoonndd ZZoonnee
↑↑↓↓ nneexxtt iitteemm EENNTT sseelleecctt
MMEENNUU mmaaiinn mmeennuu
AADDVVAANNCCEEDD ZZOONNEE AA SSEETTTTIINNGGSS
11 MMaaxx LLeevveell ++1155 ddBB
22 ZZoonnee IIDD 11
33 VV11 OOuuttppuutt TTaappee
44 SSuurrrroouunndd MMooddeess AAuuttoo
↑↑↓↓ nneexxtt iitteemm aaddjjuusstt ←←→→
MMEENNUU aaddvvaanncceedd sseettuupp