Filter
Top Products
User’s Guide
1201URX/AB • 1201URX/VM • 1201URX/Si
1201BT • 1201XT
ENHANCED BROADCAST PERFORMANCE
UHF WIRELESS SYSTEM
1201URX/AB - 1201URX/Si - 1201URX/VM
RF Carrier Frequency Range 188 steps ~ 638.125 - 661.875 MHz
MicroComputer Controlled PLL Synth.
Noise Reduction Expander (THAT)
Effective Operating Range 200 - 300 ft ~ 60 - 100m
Frequency Response 50 - 15kHz (± 1.5dB)
RF Sensitivity (12dB SINAD) 1.2μV
Adjacent Channel Selectivity > 70dB (± 250kHz)
Image Rejection > 93dB
IF Rejection > 93dB
Audio THD < 0.8%
Audio Output 40dBm ± 40kHz Deviation (-20dBm ± 40kHz Deviation for 1201URX\Si)
Output Impedance 600Ω (300Ω for 1201URX\Si)
Signal/Noise Ratio > 62dB (± 5kHz Deviation) “A” Weighted
Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1201URX\Si)
Dimensions 68W x 84H x 18D mm- 1201URX/Si insertion
93W x 119H x 49D mm - 1201URX/AB
82W x 150H x 60D mm - 1201URX/VM
Operating Temperature Range -50
0
- +122
0
F ~ -10
0
- +50
0
C
Weight 8.8 ounces ~ 250g for 1201URX/Si
15.87ounces ~ 450g for 1201URX/AB
26.45ounces ~ 750g for 1201URX/VM
1201BT
Output Power 30mW
Max Modulation Sensitivity -4dBm
MIC Level / Imped. -56dBm (± 5kHz Deviation)
Power Requirements 3V DC (2 “AA” Alkaline) @ < 150mA
Dimensions 2.48 (W) x 3.86 (H) x 1.12 (D) inches
63 (W) x 98 (H) x 28.5 (D) mm
Weight w/Battery 6.35 ounces ~ 180g
1201XT
Output Power 30mW
Max Modulation Sensitivity +20dBM ~ 0dBm
MIC Level / Imped. (Dynamic) -60dBm / 2.2kΩ (± 5kHz Dev.)
Phantom Power 48V ±2V @ 2mA
Power Requirements 3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON
Dimensions 1.57 (W) x 4.49 (H) x 1.57 (D) inches
40 (W) x 114 (H) x 40 (D) mm
Weight w/Battery 6.35 ounces ~ 180g
Due to constant improvements, specications are subject to change without notice.
Licensing
Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on the user’s classication, applica-
tion and frequency. Contact the appropriate agency (FCC in the USA) for further information.
SPECIFICATIONS
Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010
tel - 516.328.7500 • fax - 516.328.7506 • email - sales@azdencorp.com
© 2010 Azden Corporation Printed in USA P1030-02