Filter
Top Products
Installation Steps
NOTE: The numbers in these
steps match the numbers in
figure 1-1.
1.
2.
3.
4.
5.
6.
7.
Mount the PagePac Plus AmpliCenter to either the wall, cabinet or a
rack.
Pull cables.
Hookup cabling to AmpliCenter and auxiliary equipment. (Refer to
Example Setups in section 3.) Use stick-on labels to identify the
AmpliCenter/zone (i.e., cafeteria - zone 1).
Set the AmpliCenter Telephone Mode Selection Switch to match the
host telephone system and make connection.
Install power cord and plug into outlet.
Test paging zone served by the AmpliCenter. (Refer to Testing the
System, in section 3.)
Adjust sound levels using AmpliCenter controls. (Refer to
Adjustments, in section 4.)
TO HOST TEL.
SYSTEM
MUSIC INPUT
Figure 1-1. Installation Steps
Overview 1-3