Filter
Top Products
ASUS P/I-P55T2P4 User's Manual 7
III. INSTALLATION
III. INSTALLATION
(Jumpers)
Jumper Settings
1. Onboard Multi-I/O Selection (JP1)
You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-
lel, and IrDA) through BIOS (see CHIPSET FEATURES SETUP) or disable all
Multi-I/O items at once with the following jumper in order to use your own
Multi-I/O card.
Selections JP1
Enable [1-2] (Default)
Disable [2-3]
1
Multi I/O Setting (Enable / Disable)
2
3
JP1
Enable (Default) Disabled
1
2
3
JP1
2. Flash ROM Boot Block Programming (JP2)
This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Enabled position.
Programming JP2
Disabled [1-2] (Default)
Enabled [2-3]
1
JP2
Boot Block Programming (Disable / Enable)
JP2
23 123
Disabled (Default) Enabled