Asus P/I-P55T2P4 Home Theater System User Manual


 
ASUS P/I-P55T2P4 User's Manual8
III. INSTALLATION
(Jumpers)
III. INSTALLATION
3. Total Level 2 Cache Size Setting (JP5)
This jumper sets the total amount of L2 cache that is present. If you have both
onboard cache chips (see "Map of Motherboard" for locations) and a Cache
Expansion Slot, then you have 256KB. If you only have onboard cache chips,
then you have 512KB. An "ASUS" or "COAST" cache module can be used to
upgrade the 256KB version to 512KB. If there is no onboard cache, you may
install a cache module of either 256KB or 512KB. IMPORTANT: See page
14 "SRAM Cache" for installation procedures. Regardless of your cache
combination, set the following jumpers according to the total amount of L2
cache that is present onboard and installed as a module.
Selections JP5
256KB [1-2]
512KB [2-3]
Total L2 Cache Size Setting (256KB / 512KB)
1
2
3
JP5
256KB 512KB
1
2
3
JP5
4. Real Time Clock (RTC) RAM (JP7)
This clears the user-entered information stored in the CMOS RAM of the Real
Time Clock such as hard disk information and passwords. To clear the RTC
data: (1) Turn off the PC, (2) Short this jumper, (3) Power on the PC, (4) Turn
off the PC, (5) Remove this jumper, (6) Power on the PC, (7) Hold down <De-
lete> during bootup and enter BIOS setup to re-enter user preferences.
Selections JP7
Operation [open] (Default)
Clear Data [short] (momentarily)
RTC RAM (Operation / Clear Data)
JP7
Operation (Default) Clear Data
JP7