Filter
Top Products
©American Audio® - www.AmericanAudio.us - DCD-PRO210™ Instruction Manual Page 13
LIQUID CRYSTAL DISPLAY (LCD)
LCD DISPLAY (FIGURE 7)
35. TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (41, 42, &
43). As with the TIME METER (41, 42, & 43), this bar is also dependent on the selected time function
REMAIN (37) OR ELAPSED (36). This bar will begin to flash when 15 seconds of a track remain and
will begin to rapidly flash when three seconds of a track remain. The flashing bar is a great visual
reminder a track is about to end. The flashing bar will function regardless of which time mode the unit
is in.
36. ELAPSED INDICATOR - This indicator is in direct reference to the TIME METER (41, 42, & 43)
When the ELAPSED indicator is displayed in the LCD (4), the time defined will refer to a single track's
elapsed time. The time mode is changed by the tapping on the TIME BUTTON (13).
37. REMAIN INDICATOR - This indicator is in direct reference to the TIME METER (41, 42, & 43).
When the REMAIN indicator is displayed in the LCD (4), the time defined will refer to a single track's
remaining time. The time mode is changed by tapping on TIME BUTTON (13).
38. PITCH METER - This meter displays the pitch percentage being applied to playback by the
PITCH SLIDER (5). If the meter read zero regardless of the PITCH SLIDER'S (5) position, the PITCH
(5) function is not activated.
39. SINGLE INDICATOR - This indicates the unit is in single play mode. In single play mode, the unit
will play a single and return to CUE mode.
40. CONTINU INDICATOR - This indicates the unit is in continuous play mode. In continuous play
mode the unit will play through all the tracks on the disc. Once all the tracks have ended the unit will
return to cue mode.
41. FRAME METER - This meter will display the elapse, total, or frames. The displayed frames will
be indirect reference to the current time mode.
42. SECONDS METER - This meter will display the elapse, total, or remaining time in seconds. The
display time will be indirect reference to the current time mode.
43. MINUTES METER - This meter will display the elapse, total, or remaining time in minutes. The
display time will be indirect reference to the current time mode.
44. TRACK INDICATOR - This double digit indicator details a current track. The number displayed in
the track indicator is a direct reference to a track being selected for programming or a track in play,
pause, or cue mode.
Figure 7
35
44 43 42 41 40 39
383736