Filter
Top Products
MULTITASKER™
400-0209-002
13
13
Command Format: [VLOAmCnUi]
m = Volume Level (m = # from 0 to 16)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Set the output volume to 16 for the
MT113-100/101 in slot #4. Send the command
[VLOA16C4].
15. [VLI]
This command sets an INPUT volume to an
absolute level.
Command Format: [VLIxAmCnUi]
x = Input Number (x = # from 1 to 3)
m = Volume Level (m = # from 0 to 16)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Set Input 2 volume level to a value of 8 for the
card in slot #4. Send the command [VLI2A8C4].
16. [VLBA]
This command sets the output BASS level to an
absolute level.
Command Format: [VLBAmCnUi]
m = BASS Level (m = # from 0 to 16)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Set the output BASS level of the
MT113-100/101 in slot #4 to the maximum of 16
by sending the command [VLBA16C4].
17. [VLTA]
This command sets the output TREBLE level to
an absolute value.
Command Format: [VLTAmCnUi]
m = TREBLE (m = # from 0 to 16)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Set the output TREBLE of the MT113-100/101
in slot #4 to a mid-range value of 8 by sending
the command [VLTA8C4].
18. [LOD0]
This command disables the loudness feature.
Command Format: [LOD0CnUi]
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Turn OFF the Loudness feature of the
MT113-100/101 in slot #4 by sending the
command [LOD0C4].
19. [LOD1]
This command enables the loudness feature.
Command Format: [LOD1CnUi]
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Turn ON the Loudness feature of the
MT113-100/101 in slot #4 by sending the
command [LOD1C4].
20. [MUT0]
This command enables the speaker output. It
does not affect the fixed output.
Command Format: [MUT0CnUi]
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)