Filter
Top Products
38-EN
XM Radio (Optional)
Receiving XM Channels with the XM
Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment,
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-T021XM) and an
optional XM Antenna may be connected to the IVA-D900. With an
XM Receiver connected to the Ai-NET input of the IVA-D900, the
XM Receiver will be controllable from the IVA-D900.
* XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
• The controls on the IVA-D900 for XM Receiver operation are
operative only when an XM Receiver is connected.
1
Press SOURCE/POWER.
The main menu is displayed.
2
Turn the Rotary encoder to select “XM,” then
press the Rotary encoder.
3
Press BAND to select XM1, XM2 or XM3.
4
Press 2 (NO./NAME) to select the channel
number tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning ↔ channel name tuning
5
Press 1 (; CH NO. DN) or 3 (CH NO. UP :) to
select the desired channel. Holding either button
down will change channels continuously.
When you select the channel name tuning in step 4, press
1 (; CH NAME DN) or 3 (CH NAME UP :) to select a
channel name.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Press 7 (PAGE 1/3) twice to select the disc numbers 7
to 12.
The Function Guide display changes and now the
Function buttons 1-6 represent disc numbers 7-12.
• After selecting the desired setting, you can operate in the same way
as for the CD player. For details, see the CD/MP3 section
• Press BAND to switch the Disc mode in the CD/DVD/Changer
mode.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the IVA-D900 as
well as the CD changer.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2 Switching devices,
you can connect up to 6 CD Changers. When using KCA-410C
(Versatile Link Terminal), you can connect two changers only.
1
Press SOURCE/POWER to display the main
menu.
2
Turn the Rotary encoder to select a desired
changer.
The display shows the selected CD changer mode
screen.
• When one KCA-400C is connected to the changer, "Changer
1-4" is displayed in the main menu. When two KCA-400Cs
are connected to the changer, "Changer 1-6" is displayed in
the main menu. When one KCA-410C is connected to the
changer, "Changer 1-2" is displayed in the main menu.
• In Changer mode, you can select the next changer (connected
changers only) by pressing BAND on the unit or on the
remote.
• You cannot operate this function in the Title display or Title
Inputting display.
3
To operate the selected changer, see "CD/MP3"
section.
• To operate the selected changer, see “CD/MP3”(pages 12-
13).
7
6
5
4
3
2
1
BAND
SOURCE/POWER
Rotary encoder
LIST/INPUT