Alpine IVA-D900 Speaker System User Manual


 
32-EN
4
Turn the Rotary encoder to select your desired
setting item.
The screen shows the
Function Guide.
*Displays the function assigned for each button (the Function
buttons).
Setting items:
MONITOR OPEN/CLOSE V.SEL KEY MULTI
SESSION PLAY BEEP CLOCK CLOCK ADJUST
DAYLIGHT SAVING TIME
PHONE RECEIVE
*Displayed only when Mobile Hub (CXA-B200NK) is
connected.
5
Press the Function buttons to switch the setting.
6
Press 7 (RETURN).
The screen returns to the previous one.
•With the General screen displayed, pressing and rotating the rotary
encoder can adjust the volume level.
•Immediately after inputting titles or changing the settings of
General Mode (While the system is inputting the titles or data
automatically) do not turn the ignition key (engine key) to OFF.
Otherwise, the title may not be written, or the settings may not be
changed.
Setting Automatic Opening/Closing of the Monitor
Setting item: MONITOR OPEN / CLOSE
Setting content: MANUAL / FULL / CLOSE
MANUAL: The monitor is manually opened or closed by
pressing OPEN/CLOSE.
FULL: The monitor automatically opens when the ignition
key is turned to the "ACC" or "ON" position.
CLOSE: The monitor automatically closes when the ignition
key is turned OFF.
Setting Visual Mode
Setting item: V.SEL KEY
Setting content: NAV. / V.SEL
You can display the screen of the preset item by just pressing the
V. SEL button on the IVA-D900.
NAV.: Pressing V. SEL directly switches to the navigation
screen.
V.SEL:Each press of V. SEL switches the modes:
<ex.>
SOURCE DISPLAY AUX1 AUX2 AUX3
Navigation CAMERA SOURCE DISPLAY
This operation cannot be carried out when NAV. IN, CAMERA IN
and AUX IN 1 to 3 in the SYSTEM list screen are set to off.
Playing MP3 Data
Setting item: MULTI SESSION PLAY
Setting content: CD / MP3
When using discs containing both audio data and MP3 data.
CD: Plays only the audio data on discs containing both audio
data and MP3 data.
MP3: Playes only the MP3 files on discs containing both audio
data and MP3 data.
When an MP3 CD changer is used, both the audio data and the
MP3 data will be played.
SYSTEM Setup
Sound (Beep) Guide Function
Setting item: BEEP
Setting content: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
Displaying the Time
Setting item: CLOCK
Setting content: OFF / ON
The clock display is turned off or on respectively.
Setting the Time
Setting item: CLOCK ADJUST
Setting content: HOUR DN / UP / MINUTE DN / UP / TIME RESET
HOUR DN / UP: Adjust the hour.
MINUTE DN / UP: Adjust the minute.
TIME RESET: When it is pressed at “:less than 30,” the
minute will be “:00”; at “: more than 30,”
the hour advances.
The clock adjusting mode is canceled when the power is turned off,
when 7 (RETURN) is pressed, or when another item of
GENERAL SETUP is selected.
Setting Daylight Saving Time
Setting item: DAYLIGHT SAVING TIME
Setting content: OFF / ON
ON: Place the Summer Time mode ON. The time advances
by one hour.
OFF: Return to the ordinary time.
Switching the Incoming Calls of the Telephone
Setting item: PHONE RECEIVE
Setting content: AUTO / MANUAL
This operation can be carried out only when a cellular phone and
Mobile Hub (CXA-B200NK) is connected.
The incoming call can be switched to Automatic Calling or Manual
Calling.
Rotary encoder
SOURCE/POWER
7
6
2
4
1
3
5