Aiwa UZ-US501 Speaker System User Manual


 
Getting Started
13
GB
4 While pressing SHIFT, set the
parameter using SELECT C/c.
5 Repeat Steps 3 to 4 to set other
parameters.
If you do not operate the remote for a
few seconds, the parameter turns off and
is stored in the system.
Parameters
The following are the parameters.
xF-DIS (FRONT DISTANCE)
Set the distance from the satellite (Front/
Center) speakers to the listening position.
The satellite (Front/Center) speaker distance
can be set anywhere from 0.4 (1.2 ft.) to 7.0
metres (21.1 ft.), in steps of 0.2 metres (0.6
ft.).The default setting is 3 metres (9 ft.).
xS-DIS (SURROUND DISTANCE)
Set the distance from the surround speakers
to the listening position in steps of
0.2 metres (0.6 ft.). The surround speaker to
listening position distance can be set from
equal to that of the satellite (Front/Center)
speaker, down to a distance of 4.6 metres
(15 ft.) closer than that of the satellite
(Front/Center) speaker. The default setting is
3 metres (9 ft.).
For instance, when the distance of the
satellite (Front/Center) speaker is 6 metres
(18 ft.), the surround speaker can be placed
at a distance of between 1.4 metres and
6 metres (4.2 to 18 ft.).
If the distance of the satellite (Front/Center)
speaker is 3 metres (9 ft.), the surround
speaker can be placed at a distance of
between 0.4 and 3 metres (1.2 to 9.0 ft.).
The minimum is 0.4 metre (1.2 ft.).