Filter
Top Products
PROGRAMMED PLAY BASIC RECORDING
Up to 30 tracks can be programmed from any of the inserted
discs,
Use the remote control
1
2
3
2
3
5
I
c)>
....__
Press the PRGM button while pressing the SHIFT
button in stop mode.
PGM is displayed.
Press one of the DISC DIRECT PLAY buttons to
select a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +1Obutton to
program a track.
Example:
To select the 25th track, press the +1O,+10 and 5 buttons.
To select the 10th track, press the +1Oand Obuttons.
Total playing time of
Program number
the selected tracks
Selected track number
Total number of
selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press the M PRESET button to start play.
To check the program
Each time the < or * buttorf is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the
■ CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be
programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
m
● During the programmed play, the EDIT/CHECK, DISC
CHANGE. DISC DIRECT PLAY and numeric buttons do not
function.
● RANDOM play is not performed during programmed play,
Preparation
● Wind up the tape to the point recording starts.
● Note that recording is done on only one side of the tape,
● Use only normal (type I) tapes.
1
2
3
Insert the tape to be recorded on into deck 1 and
push the cassette holder to close it.
Get ready for the source to be recorded.
To record from a CD
Press the CD button and load a disc.
To record from a tape
Press the TAPE button. Then, insert the original tape into deck
2 and play it.
To record from a radio broadcast
Press the TUNER/BAND button and tune in to a station.
To record from the connected source
Press the VIDEO/AUX button and play it.
m
Press the @ button to start recording.
The > button is depressed simultaneously.
When recordina from a CD, playing and recording start
simultaneously from the first track.
To stop recording
Press the W= button on deck 1.
To pause recording
Press the 11 button on dqck 1.
To resume recording, press it again.
To record selected tracks of the CD
Before pressing the
● button, program the tracks,
To start recording precisely (except when recording from
a CD)
Before pressing the
● button at step 3, press the 11 button on
deck 1. Then, press the
● button. The deck enters recording
pause mode. When you wish to start recording, press the II
button again.
To record part of the CD
When the
● button is pressed, recording always starts from the
first track. To start in the middle of a track, play the CD first and
press the II button for
CD at the point you wish to start recording
from. Then, press the
● button. The pause mode for CD button
is released automatically and recording starts.
m
Do not press the buttons on deck 2 during recording.
ENGLISH 8