Filter
Top Products
CONNECTING OPTIONAL
EQUIPMENT
-CD DIGITALOUT
(OPTICAL)
- VIDEO/AUX
Refer to the operating instructions of the connected equipment
for details.
* The connecting cords are not supplied. Obtain the necessary
connecting cords.
● Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
CD DIGITAL OUT (OPTICAL) JAiK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (digital
amplifier, DAT deck, MD recorder, etc.).
Remove the dust cap @ from the CD blGITAL OUT (OPTICAL)
jack. Then, connect an optical cable DIUCI@ to the CD DIGITAL
,.
‘OUT (OPTICAL) jack,
,#k$
a
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
LISTENING TO EXTERNAL SOURCES “
To play equipment connected to the VIDEO/AUX jacks, proceed
as follows.
1
Press the VIDEO/AUX button, ‘
VIDEO appears on the display.
2 Play the connected equipment.
To change a source name in the display
When the VIDEO/AUX button is pressed, VIDEO is displayed
initially. It can be changed to AUX or TV,
With the powsr on, press the POWER button while pressing the
VIDEO/AUX button,
Repeat the procedure to select one of the names.
13
ENGLISH
SPECIFICATIONS
Main unit CX-NA1O
FM tuner section
Tuning rangs
Antenna
AM tuner ssction
Tuning range
Antenna
Amplifier section
Power output
Total harmonic distortion .
Inputs
outputs
Cassette deck section
Track format
Frsqusncy responss
Recording systsm
Hsads
87.5 MHz to 108 MHz
Wire antenna
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
Loop antenna
7,5
W/Ch- (50 Hz-20 kHz, THD
less than 19’.,
6 ohms)
0.3 % (5 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 400 mV
SPEAKERS: accept speakers of
6 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz -10000
HZ
AC bias
Deck 1: _Recording/play back/
erase head x 1
Deck 2: Playback head x 1
Compact disc player section
Laser
Semiconductor laser (h= 780 nm)
D-A convsrter
1bit dual
Signal-to-noise ratio 90 dB (1 kHz, OdB)
Harmonic distortion
0.03 % (1 kHz, OdB)
Wow and flutter
Unmeasurable
General
Powsr rsquiremsnts
120 VAC, 60
HZ
Power consumption
40 w
Dimensions of main unit
260 x 308x 335 mm
(W XHXD)
(101/4 x12’/4x131/4in,)
Wsight of main,unit
4.4 kg (9 Ibs 11 02)
Speaker system SX-NA1 O
Cabinet type.
2 way, bass reflex (magnetic
Speeksra
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
shielded type)
Woofer:
120 mm (4
3/4in.) cone type
Tweeter:
10 mm
(i3/32 h.) ceramic type
6 ohms
87 dB/W/m
220 x 302 x 238 mm
(8 ‘/~x 12 x9 ‘/ein,)
2.5 kg (5 Ibs 8 02)
Specifications andexternal appearance are subjectto change without
notice,