Filter
Top Products
*
PRESETTING STATIONS
BASIC OPERATIONS
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune into a preset station directly.
1
2
3
0-9,+1o
BAND
SHIFT
Press the TUNER/BAND button to select a band,
and press the 144 DOWN or PM UP button to
select a station.
Press the II SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
Preset number
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly
1
Press the BAND button while pressing the SHIFT
button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
Toselect preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +1Oand Obuttons.
Selecting a preset number em the main unit
Press the TUNER/BAND button to select a band. Then, press
the - PRESET button repeatedly.
Each time the button is pressed, the next higher number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the H CLEAR button, and press the 11 SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
1
2
.... . ...~
(%ciy
L
(Deck2)
Press the TAPE button.
Usable tapes
Use only normal (type I) tapes.
1
2
3
Press the
❑/4 button to open the cassette holder
and insert a tape exposed side down.
Push the cassette holder to close it.
u w&
Press the - button to start playback.
Only the side facing you can be played back.
To stop playback, press the
■/A button.
To pause, press the II button. To resume play, press it again.
To fast forward or rewind, press the + or * button in the
stop mode, and then press the WA button td stop winding. ‘
When both deck 1 and deck 2 are set in the playback mc~de,
deck 2 is heard.
\
About cassette tapes
* To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break orjam inthe mechanism.
ENGUSH
6