Filter
Top Products
INITIAL RECEIVER CONFIGURATION
Display depth units (inches, feet and inches, or centimeters) may be
changed while holding
and pressing .
For each press, one of
three units will display. To change the passive Power frequency, press and
hold
then press to toggle between 50 or 60 Hz as displayed in
the lower left corner of the display.
Page 3
RECEIVER BATTERY TEST
To test the batteries, turn the Receiver on by pressing and holding .
The bar graph should extend to the right of the battery level mark,
otherwise replace the batteries.
Note: When batteries are low, the battery test indicator
will flash.
Battery Test
Indicator
Battery Level
Mark