Filter
Top Products
INTRODUCTION
The 3M
™
Dynatel
™
2210E Cable Locator consists of a Transmitter and a
Receiver for locating buried cables or Active Duct Probes (sondes). It also
can be used to identify cables or pairs using a Dyna-Coupler plugged into
the Receiver jack. The Transmitter provides two frequencies to
accommodate varying factors such as distance, cable type, or soil
conditions. The Receiver detects 50 or 60 Hz AC Power signals and low
frequency (LF) radio signals re-radiated form local broadcast transmitters.
It also measures the signal current in a cable and displays its magnitude.
The depth of buried cables or sondes may also be displayed.
Note: For more detailed locating instructions and advanced locating
techniques, ask your 3M sales representative for a free publication called
Cable and Pipe Locating Techniques.
INSTALLING OR REPLACING THE BATTERIES
Battery Disposal: Since regulations vary, consult applicable regulations
or authorities before disposal.
6 LR14
cells
6 LR6
cells
CAUTION!
Do not connect batteries improperly, charge or dispose of in fire.
Batteries may leak or explode and cause personal injury. Always
remove batteries when storing the units.
Page 2