4-32 Programmer’s Manual
if (sStatus != 0)
printf("Format Write error - %d", sStatus);
else
{ // Start batch
sStatus = pclWrite("{B,1,N,1|E,0,0,1,1,0,1|}", 24);
if (sStatus != 0)
printf("Batch Write error - %d", sStatus);
else
{
while ((sStatus = pclStatus()) == 1) // Wait until done
;
sStatus = pclGetOnDemandSensor(); // Check sensor
switch (sStatus) // Display result
{
case 0: printf("\nNot blocked");
break;
case 1: printf("\nBlocked");
break;
default: printf("Error-- press any key when reset.");
_getch();
pclClearError();
}
}
}
}
}
pclClose(); // Close Print subsystem
}
