Printer Features 2-13
To choose the boot options:
1. Turn on the printer while pressing f until messages
appear. You must do this step. Otherwise, the date and
time prompts (the default) wait for input without appearing
on the screen.
2. When “Starting ROM-DOS…” appears, the printer beeps.
You have approximately two seconds to do one of the
following:
♦ Press f, then 5 to bypass both files. The boot
process continues with default configurations. The
printer also prompts you for the date and time.
♦ Press f, then 8 to request a prompt at each line of
both files. Enter Y to process the line or N to bypass it.
♦ Do nothing and let the printer process every line of both
files.
Booting from a PC
To boot the printer from the PC:
1. Gather the following files on a floppy disk:
♦ COMMAND.COM
♦ REMDISK.EXE
♦ LCD.COM
♦ AUTOEXEC.BAT (at a minimum, this file must contain
one line containing LCD Y C, which enables the display).
2. Enter REMSERV A: at the PC’s DOS prompt, where X is
the drive where the boot files reside.
3. Turn on the printer and from the Startup Menu, choose #3.
The printer boots from the PC.
