66 OKIFAX 4580 Users Guide
Codes Used in Reports
Result Codes
Result codes indicate the results of communica-
tions.
Code Description
BUSY The other machine’s line was busy or there
was no answer.
CANCL A message was erased after being held in
memory for 10 days.
COMP. A multiple-location transmission was
completed.
COVER The fax machine’s cover was opened
during the communication.
NO The transmission or reception failed due to
a communication error.
OK The communication was completed
successfully.
PUNIT This error code indicates a problem with
the printing unit. Contact your service
person.
R_JAM A paper jam occurred in your machine
while it was receiving a fax, and your fax
machine was unable to receive the entire
message in memory.
S_JAM A document jam occurred in the sending
fax machine.
STOP The STOP key was pressed, ending the
communication session.
Communication Codes
Communication codes indicate the communication
mode was used for a communication.
Code Description
TX A communication initiated by your fax
machine.
RX A communication initiated by a remote fax
machine.
POLL RX Polling Reception
POLL TX Polling Transmission
POLL=** Bulletin Polling Transmission (** is the Box
No.)
CONF=** Confidential Reception (**is the Box No.)
FWD-T Forwarding Transmission
FWD-R Forwarding Reception
B.C. Broadcast Transmission
