Advanced Operations 45
Sending a Delayed Fax From Memory
DELAYED TX DATE
[07/01] YES(
) NO (
)
+
SELECT
FUNCTION
DELAYD
TX
1
1
Load your documents.
2
Press the SELECT FUNCTION key.
3
Press the 1/DELAYED TX One-Touch key. The
display shows
DELAYED TX and today’s date.
4
Press
NO
. The display shows DELAYED
TX DATE. Or, if the transmission is to occur on
the same day, press
YES
and go to Step 6.
5
Using the numeric keypad, enter the date on
which you wish the transmission to begin.
6
Press
YES
. The display shows DELAYED
TX TIME.
7
Using the numeric keypad, enter the time on
which you wish the transmission to begin.
Tip:
Be sure to enter the time using the 24-
hour clock (i.e., 8:00 a.m. would be entered
as 08:00, and 8:00 p.m. would be entered as
20:00).
8
Press
YES
. The display shows SELECT
LOCATIONS.
9
Select a location. Refer to the instructions
below.
To Select Using Do This
A One-Touch key Press the
One-Touch key.
An Auto Dial number Press the AUTO
DIAL key, then enter
the three digit Auto
Dial number on
the numeric keypad.
A number dialed on Dial as you would
the numeric keypad on a normal tele-
phone.
10
Press the START key to finish the program-
ming.
Canceling a Delayed Transmission
To cancel a delayed transmission from the docu-
ment feeder or from memory before it has been
sent, follow the instructions below.
1
Press the STOP key. The display shows
COMMUNICATION CANCEL.
2
Press
. The display shows the Loca-
tion ID of the delayed transmission currently
loaded in your machine.
3
Press
YES
.
4
If the delayed transmission was a feeder
transmission, press the STOP key again to
remove the document from the document
feeder.
