Installation 23
Connect to the Telephone Line
1
Insert one end of the telephone cord into the
LINE terminal at the back of the machine.
Fig05_13.eps
2
Insert the other end of the cord into your wall
telephone jack.
Tip:
You may also connect either an external
telephone or the external handset option
for your machine. See the instructions
below.
Connecting an External Telephone or Answer-
ing Machine
1
Insert one end of the telephone cord into the
TEL terminal on the back of the machine.
Fig05_14.eps
2
Insert the other end of the cord into the jack in
your external device.
Tip:
To connect both an answering machine
and a telephone, first connect your
answering machine to your machine,
then plug your external telephone’s cord
into the telephone jack on your answer-
ing machine.
Tip:
You need to have the TAD mode feature
turned on for an answering machine to
work with your machine. See Setting the
Answering Mode in this section.
Connect Power
Warning: Before connecting power, ensure
that the power switch is OFF (“O” is
pressed in)
1
Plug the power cord into the power inlet located
on the back of the unit.
Fig05_15.eps
2
Plug the unattached end of the power cord into
a grounded AC power outlet.
3
Turn the power switch to ON.
The time and current answering mode appears
on the display. Your machine is now in standby
mode, ready to send or receive faxes.
