MX6 Utilities 89
E-EQ-MX6RG-E-ARC MX6 Reference Guide
RASMan
Access: (Version 7.03 and 7.11) Start | Utils | RASMan
(Version 7.13) Start | Power Tools | RASMan
Setup the parameters for a mobile device when it needs to create a PPP connection with a RAS
server. Help is not available for this option.
RASMan establishes a PPP (Point-to-Point Protocol) connection with a RAS server.
To Enable RASMan
1. Tap Start | Power Tools. The Power Tools Main Window appears.
2. Tap the RASMan icon once . The PPP connection is established according to the settings
established RASMan configuration file.
Note: To start RASMan automatically after each hard reset, enable the RASMan Program
section in the Autorun Configuration File.
To Disable RASMan
Tap Start | Power Tools and tap the RASMan icon again.
OR
Tap the RASMan icon to open the Command bar menu and tap Exit.
RASMan Command Bar Menu
When RASMan is enabled, the RASMan icon appears in the Command bar at the bottom of the
Today screen. Tap the icon to open the Command bar menu.
Menu Item Selecting this item …
Auto Connect This item is selected by default. It means that the mobile device is
connected to the RAS server via PPP.
Connect Re-establishes the PPP connection if it was disconnected.
Disconnect Disconnects the PPP connection.
About Displays version and description information about RASMan.
Exit Disables RASMan; the icon no longer appears in the Command bar.
