Quick Start 13
E-EQ-MX5CEOGWW-F-ARC MX5X User’s Guide
Power Key
Note: Refer to the section titled Power Modes in the MX5X Reference Guide for information
relating to the power states of the MX5X.
The Power key is located next to the <Z> key on the keypad. When a battery is inserted in the
MX5X for the first time press the Power key.
Tapping the Power key places the MX5X immediately in Suspend mode. Tapping the Power key
again, or connecting to AC power, immediately returns the MX5X from Suspend.
Figure 10 Power Key Location
Reboot Sequence
When the Windows desktop is displayed or an application begins, the power up (or reboot)
sequence is complete. If you have previously saved your settings, they will be restored on reboot.
Application changes are saved when OK is clicked on an application applet.
Warm Reset
Hold down the Power key and the Orange key for 4+ seconds until the display blanks, then
release the keys. A warm reset does not affect the operating system and no data loss occurs.
Cold Reset
Hold down the Power key, the Blue key and the Orange keys for 4+ seconds. The MX5X will
power off, release the keys and the device will power on again.
Calibrating the touchscreen will need to be performed when the MX5X powers on again.
If needed, change the MX5X Time and Date from it’s default values by tapping the
| Settings |
Control Panel | Date/Time icon.
Important:-- Because of the extreme nature of the Cold Reset, LXE
recommends that the Cold Reset be used only as an emergency
procedure and the Warm Reset be used whenever necessary.
LXE recommends the RegSave file be run when configuration changes are made.
Note: When performing a Cold Reset on this device, the system will ask if you want to
overwrite files –LXE recommends selecting No and continuing with the Cold Reset
process.
