Quick Start 7
E-EQ-MX5CEOGWW-F-ARC MX5X User’s Guide
Start-up Troubleshooting
Can’t align the screen,
change the date/time or
adjust the volume.
AppLock is installed and running on the mobile device. AppLock restricts user
access to the control panels. See the MX5X Reference Guide for AppLock
setup and processing information..
RFTerm® opens and
runs upon each cold
reset and warm reset.
Tap File | Exit to close the RFTerm application. RFTerm runs by default after
rebooting.
Touch screen won’t
accept stylus taps.
Touchscreen may have been disabled or the touchscreen may require
recalibration. Hold down the Power key and the Orange key for 4+ seconds to
warmboot the device. Force the Start menu to appear by pressing the right
arrow key and the Blue key to access Start button options, then use the arrow
keys to select menu options (e.g. Start | Settings ).
To set up the integrated scanner barcode reading parameters, please refer to the
Integrated Scanner Programming Guide on the LXE Manuals CD or the LXE
ServicePass web page. Your device may have an integrated SE1223, SE1224 or
SE2223 scan engine.
Important Battery Information
Important: If the main battery has been out of the MX5X for an extended
period of time or becomes fully discharged or dead, a fully charged
backup battery will last for up to 24 hours. If this happens, the
device will cold reset the next time power is applied from either AC
power or a charged main battery. A cold reset will cause loss of
data and custom programs. Always store unused MX5’s with a fully
charged main battery pack installed. The MX5X requires periodic
connection to an external power source to maintain an optimum
backup battery charged status.
• Until the main battery and backup battery are completely depleted, the MX5X is always
drawing power from the batteries (On).
• New batteries must be fully charged prior to use.
2
• Whenever possible, use the AC power adapter with the MX5X to conserve the main
battery and charge the backup battery.
• When a new battery is installed in the MX5X for the first time (or when the backup battery
is completely depleted), the Time and Date reverts to it’s default values.
Li-Ion Battery
When disposing of the MX5X main battery, the following precautions should be observed: The
battery should be disposed of properly. The battery should not be disassembled or crushed. The
battery should not be heated above 212°F (100°C) or incinerated.
2
If the MX5X has a dead main battery and is as cold as the extended operating temperature’s
lowest value, the unit must be warmed to above –20°C (-4°F) before installing a new main battery
pack and pressing the On button.
