Using the protocols
2-14 PagePrinter Network Adapter: Utilities & Environments
To ftp to the directory:
1
Type the following at the command prompt:
ftp ip.address
where
ip.address is the IP address you’re using, such as 9.51.8.231.
2
Type:
cd param
3 Type:
put config-file
where
config -file is the name of the file containing the
configuration you want to use.
4
Quit.
What to do next
You have set up your adapter and are ready to use it.
Continue with “Using the protocols“.
Using the
protocols
This section explains how to use standard TCP/IP protocols to send jobs to the
printer and to check the status of print jobs. It explains how this Network
Adapter implements standard TCP/IP protocols such as:
• Line Printer Remote (LPR) programs
• File Transfer Protocol (FTP)
• Trivial File Transfer Protocol (TFTP)
• Finger
• Telnet
Note: The firmware in the Network Adapter includes support for other
adapters. The Network Adapter contains only one port (PORT 1) which
supports this printer. The multi-purpose firmware in the Network Adapter
may make references to port 2 (or IBM 4029 printers), but these statements
apply to other types of hardware. Furthermore, any statuses refering to
MarkNet XLe should be treated as equivalent statuses of the Network
Adapter.
