Setup
2-8 PagePrinter Network Adapter: Utilities & Environments
Setting the information via the printer control panel
If you already know the printer’s IP address, netmask, and gateway, you may
want to set them at the printer’s control panel. This process sets the address,
netmask, and gateway at this printer only and does not update any BOOTP
records you have in your server.
1 Using the printer’s control panel, set the IP address, netmask, and gate-
way.
If you need help, follow these steps:
a Turn the printer power On (|).
b Use the printer control panel to find the menu item SETUP NETWORK
MENU. Consult your printer documentation to learn the menu path for
your specific printer, or scroll through the control panel menus until you
find it.
c Select SETUP NETWORK MENU.
d Select Set IP ADDRESS, and press ENTER. A screen similar to the
following appears:
e Use the MENU button to place the cursor beneath the part of the IP
address that you want to set. Then use the plus (+) and minus (-) keys
to set the address.
f Press ENTER.
g Select Set IP NETMASK, and press ENTER.
h Set the IP netmask just as you set the IP address.
i Press ENTER.
j Select Set IP GATEWAY, and press ENTER.
k Set the IP gateway just as you set the IP address.
l Press ENTER.
m Press READY. Your settings take effect when you return to the Ready
screen.
If an error message appears on the printer’s control panel, go to “Using the
printer control panel” on page A-1.
IP ADDRESS
000.000.000.000
