5-2 Service Manual
5021-0XX
Part name Description
Paper stopper Stopper for exited papers.
Operator panel/cover Displays status of printer operation.
Top cover assembly Upper enclosure and also the paper exit tray.
Rear cover assembly Printer rear enclosure that opens allowing
clearing of internal paper jams or
maintenance work.
Release lever (rear cover
assembly)
Releases rear cover assembly.
Release lever (top cover
assembly)
Releases the opening portion of the top
cover assembly. Opening the top cover
assembly allows access to the
photodeveloper unit.
Right cover Covers the right side of the printer where the
motors and drives are located.
Front cover Printer front enclosure that opens allowing
toner cartridge or waste toner bottle
replacement.
Paper tray Standard paper tray that holds printer paper.
Upper duplex cover Covers a portion of the paper exit and is
removed prior to installing duplex unit.
Left cover Covers the left side of the printer where a
majority of the electronic boards are located.
Power switch Turns the printer on and off.
AC input inlet Connects the power cord that supplies AC
power to the printer.
Lower duplex cover Covers a portion of the paper feed path and
is removed prior to installation of the duplex
unit. Removal of the lower duplex unit also
gives access to paper guide (A) and (B)
assemblies.
