Garmin aera 795/796 Pilot’s Guide
190-01194-00 Rev. C
38
GPS Navigation
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
The course deviation scale appears on the lower right corner of the HSI. There
are four CDI Scale settings ('Automatic', '0.25 nm', '1.25 nm', and '5.00 nm'. Three
factors are used to determine the distance from the center of the CDI to full left or right
limits when the CDI Scale is set to 'Automatic':
•CDI scale = 0.25 - on an approach leg or within 2 nm of the FAF or MAP.
•CDI scale = 1.25 - within 30 nm of any airport in the active route.
•CDI scale = 5.0 - if the previous two conditions do not exist.
Displaying/Removing the HSI/Panel:
1)
From the Main Menu, touch Map > Menu > Show/Hide...
2)
Touch the Show/Hide Button in the 'Panel' datafield.
Changing the CDI scale:
1)
With the Panel displayed, from the 'Home' Screen, touch Map > Menu >
Set CDI Scale.
2)
Touch the desired CDI Scale (' Automatic', ' 0.25 nm', ' 1.25 nm', or
'5.00 nm').
SETTING THE BUG INDICATOR
The Bug Indicator can be set from the Map option menu.
Setting the Bug Indicator:
1)
From the Main Menu, touch Map > Menu > Set Bug Indicator.
2)
Touch the desired menu option ('User Selected', 'Bearing', 'Course to
Steer', or 'Off').
MANUALLY SETTING A COURSE
Use the ‘Set OBS and Hold’ menu option from the Map option menu to manually
set your course to the destination.
Manually setting a course to the destination waypoint:
1)
From the Main Menu, touch the Map or the Active FPL Icon.
2)
Touch the Menu Icon.
3)
Touch the Set OBS and Hold (only available when navigating a Direct To
or Flight Plan).
