Web/SNMP Management SmartSlot Card User’s Guide 55
Events Menu
Event Recipients
Overview
The Web interface and Control Console both have options that allow
you to define the trap receivers and up to four Email addresses to be
used when an event occurs that has the SNMP traps or Email enabled,
as described in
Event Actions (Web Interface only) on page 53
.
Trap receivers
The
Trap Receiver
settings allow you to define up to four specific NMSs
to which traps will be sent.
Note:
In the Control Console, access these settings through the
SNMP
option in the
Network
menu.
Email options
See
Email
on the next page.
Item Definition
Community Name
The password (maximum of 15
characters) used when traps are sent to
the
NMS
identified by the
Receiver NMS IP
setting.
Receiver NMS IP
The IP address of the NMS to which traps
will be sent. If this setting is
0.0.0.0
(the
default value), traps will not be sent to any
NMS
.
Trap Generation
Enables (by default) or disables the
sending of any traps to the
NMS
identified
the
Receiver NMS IP
setting.
Authentication Traps
Enables or disables the sending of
authentication traps to the
NMS
identified
the
Receiver NMS IP
setting
.
