Web/SNMP Management SmartSlot Card User’s Guide 19
Control Console
Control Console Menu
Overview
The Control Console menu has four options, three of which provide
access to the Control Console’s management features:
1- Device Manager
2- Network
3- System
4- Logout
Note:
When you log in as Device Manager, you can access
only the event log and the Device Manager menus.
Device Manager
option
This option accesses the Device Manager menu. You use this menu’s
options to select the device to manage:
1- Environment
2- Smart-UPS 700
Note:
The first
Environment
option is only present when an
Environmental Monitoring SmartSlot Card is present.
For information about the menus used to manage a
UPS
and
Environmental Monitoring SmartSlot Card, see
Device Manager
Menus on page 34
.
Network option
To do any of the following tasks, see
Network Menu on page 26
:
• Configure the Management Card’s TCP/IP settings.
• Use the Ping utility.
• Define settings that affect the use of TFTP, FTP, Telnet, the Web
interface, SNMP, and Email.
System option
To do any of the following tasks, see
System Menu on page 30
:
• Control Administrator and Device Manager access.
• Define the system
Name
,
Contact
, and
Location
values.
• Set the
Date
and
Time
used by the Management Card.
• Use file transfer protocols.
• Reboot the Management Card.
• Reset the Control Console settings to default settings.
• Access system information about the Management Card.
