Using Statistics on the 56/64 Kbps CSU/DSU Port (45x and 55x) 115
Using Statistics on
the 56/64 Kbps
CSU/DSU Port
(45x and 55x)
The 56/64 Kbps CSU/DSU port reports 24 hour statistics in 15 minute
samples. These statistics are cumulative from the last reboot or the last
time these statistics were flushed, whichever is later.
To view the statistics for the CSU/DSU path, enter:
SHow !3 -PATH WanCounters
The display looks similar to the following example:
CUMULATIVE STATISTICS SINCE LAST FLUSHED OR REBOOTED+
LAST 24 HOURS STATISTICS IN 15 MINUTE SAMPLES
The error definitions are:
To flush the statistics displayed by the previous command, enter:
FLush !3 -PATH WanCounter
SevErrSecs 0019K
ErrSecs 00020K
ErrFreeSecs 00245M
AvailSecs 00245M
CodeViolate 00168K
LossofSig 00000
OutofFrame 00414K
RemoteLback 00000
00:15 00:30 00:45 01:00 01:15 01:30 01:45 02:00 02:00
SevErrSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000
ErrSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000
ErrFreeSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000
AvailSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000
CodeViolate 00000 00000 00000 00000 00000 00000 00000 00000 00000
LossofSig 00000 00000 00000 00000 00000 00000 00000 00000 00000
OutofFrame 00000 00000 00000 00000 00000 00000 00000 00000 00000
RemoteLback 00000 00000 00000 00000 00000 00000 00000 00000 00000
SevErrSecs: The number of seconds of severe errors.
ErrSecs: The number of seconds with errors.
ErrFreeSecs: The number of error-free seconds.
AvailSecs: The number of seconds available for normal operation.
CodeViolate: The number of code violations.
LossofSig: The number of “No pulses received at the network interface”.
OutofFrame: The number of “No framing pattern sync at the network interface”.
RemoteLBack: The number of loopbacks initiated by a remote site.
