Yamaha RX-V1400 Stereo System User Manual


 
SPECIFICATIONS
85
English
ADDITIONAL
INFORMATION
AUDIO SECTION
Minimum RMS Output Power for Front, Center, Surround,
Surround back
20 Hz to 20 kHz, 0.04% THD, 8 ..................................... 110 W
Maximum Power (EIAJ)
[China, Asia, Korea and General models]
1 kHz, 10% THD, 8 ..........................................................165 W
Dynamic Power (IHF)
[U.S.A., Canada, China, Australia, Asia, Korea and General
models]
8/6/4/2 ........................................................ 145/185/240/320 W
DIN Standard Output Power [U.K. and Europe models]
1 kHz, 0.7% THD, 4 .........................................................170 W
IEC Output Power [U.K. and Europe models]
1 kHz, 0.04% THD, 8 .......................................................125 W
Damping Factor (IHF)
20 Hz to 20 kHz, 8 ................................................... 140 or more
Frequency Response
CD terminal to Front L/R ...................... 10 Hz to 100 kHz, –3 dB
Total Harmonic Distortion
PHONO to REC OUT (20 Hz to 20 kHz, 1 V) .................. 0.02%
CD, etc. to Front L/R (20 Hz to 20 kHz, 60 W, 8 Ω) .......... 0.04%
Signal to Noise Ratio (IHF-A Network)
Phono (5 mV) to Front L/R
[U.K., Europe and Australia models] ....................................81 dB
[Other models].......................................................................86 dB
CD (250 mV) to Front L/R, Effect Off................................100 dB
Residual Noise (IHF-A Network)
Front L/R ............................................................... 150 µV or less
Channel Separation (1 kHz/10 kHz)
PHONO (terminated) to Front L/R ........................... 60 dB/55 dB
CD (5.1 k terminated) to Front L/R ....................... 60 dB/45 dB
Tone Control (Front L/R)
BASS Boost/Cut ....................................................... ±6 dB/50 Hz
BASS Turnover Frequency..................................................350 Hz
TREBLE Boost/Cut ................................................ ±6 dB/20 kHz
TREBLE Turnover Frequency............................................3.5 kHz
Phones Output .......................................................... 150 mV/100
Input Sensitivity/Input Impedance
PHONO .................................................................. 3.5 mV/47 k
CD, etc .................................................................. 200 mV/47 k
MULTI CH INPUT ............................................... 200 mV/47 k
Output Level/Output Impedance
REC OUT ............................................................. 200 mV/1.2 k
PRE OUT ................................................................... 1.0 V/500
SUBWOOFER ........................................................... 2.0 V/500
ZONE 2 OUTPUT
[U.S.A., Canada and Australia models].................. 1.0 V/1.2 k
ZONE 3 OUTPUT
[U.S.A., Canada and Australia models]............. 200 mV/1.2 k
VIDEO SECTION
Video Signal Type
[U.S.A., Canada and Korea models] ................................... NTSC
[Other models] ............................................................ PAL/NTSC
Signal to Noise Ratio .............................................................. 50 dB
Frequency Response (MONITOR OUT)
Composite, S-Video ................................. 5 Hz to 10 MHz, –3 dB
Component ............................................... 5 Hz to 60 MHz, –3 dB
FM SECTION
Tuning Range
[U.S.A. and Canada models] ........................... 87.5 to 107.9 MHz
[Asia and General model] ......... 87.5/87.50 to 108.0/108.00 MHz
[Other models] ............................................ 87.50 to 108.00 MHz
Usable Sensitivity (IHF)........................................ 1.0 µV (11.2 dBf)
Signal to Noise Ratio (IHF)
Mono/Stereo .............................................................. 76 dB/70 dB
Harmonic Distortion (1 kHz)
Mono/Stereo ................................................................ 0.2%/0.3%
Stereo Separation (1 kHz) ....................................................... 42 dB
Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB
AM SECTION
Tuning Range
[U.S.A. and Canada models] .............................. 530 to 1710 kHz
[Asia and General models] ................. 530/531 to 1710/1611 kHz
[Other models] ................................................... 531 to 1611 kHz
Usable Sensitivity ............................................................. 300 µV/m
GENERAL
Power Supply
[U.S.A. and Canada models] .............................. AC 120 V/60 Hz
[Australia model] ............................................... AC 240 V/50 Hz
[China model] ..................................................... AC 220 V/50 Hz
[Korea model] .................................................... AC 220 V/60 Hz
[U.K. and Europe models] ................................. AC 230 V/50 Hz
[Asia and General models] AC 110/120/220/230-240 V, 50/60 Hz
Power Consumption
[U.S.A. and Canada models] ................................. 500 W/630 VA
[Other models] ................................................................... 500 W
Standby Power Consumption
[Asia and General models] (AC 240 V/50 Hz)......... 0.8 W or less
[Other models] ......................................................... 0.5 W or less
•AC Outlets
[U.S.A. and Canada models]..... 2 (Total 100 W/0.8 A maximum)
[U.K. and Australia models] .............. 1 (Total 100 W maximum)
[China and Europe models] ................ 2 (Total 100 W maximum)
[Asia and General models] ................... 2 (Total 50 W maximum)
Dimension (W x H x D)................................ 435 x 171 x 433.5 mm
(17-1/8” x 6-3/4” x 17-1/16”)
Weight .................................................................. 15.5 kg (34.2 lbs)
SPECIFICATIONS
00_RX-V1400U_EN.book Page 85 Thursday, February 19, 2004 4:26 PM