Filter
Top Products
75
English
SOUND FIELD PARAMETER DESCRIPTIONS
ADDITIONAL
INFORMATION
■ REV.TIME (Reverberation time)
Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to
decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an
extremely wide range.
Description: Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time
for “live” sources and listening room environments.
Control Range: 1.0 – 5.0 sec
■ REV.DELAY (Reverberation delay)
Function: This parameter adjusts the time difference between the beginning of the direct sound and the beginning
of the reverberation sound.
Description: The larger the value, the later the reverberation sound begins. A later reverberation sound makes you
feel like you are in a larger acoustic environment.
Control Range: 0 – 250 msec
■ REV. LEVEL (Reverberation level)
Function: This parameter adjusts the volume of the reverberation sound.
Description: The larger the value, the stronger the reverberation becomes.
Control Range: 0 – 100%
Reverberation
Reverberation
60 dB 60 dB 60 dB
Source Sound
REV.TIME
REV.TIME
REV.TIME
Early Reflections
Sound Source Short
Reverberation
Long
Reverberation
Small value = 1.0 s
Large value = 5.0 s
(dB)
60 dB
Level
Source Sound
Reverberation
REV.TIME
REV.DELAY
Time
Source Sound
Level
REV. LEVEL
Time
00_RX-V1400U_EN.book Page 75 Thursday, February 19, 2004 4:26 PM