Filter
Top Products
En 45
Setup
menu items
Menu Item Function Page
Speaker
Configuration
Subwoofer Selects whether or not a subwoofer is connected. 47
Front Selects the size of the front speakers. 47
Center Selects whether or not a center speaker is connected and its size. 47
Surround Selects whether or not surround speakers are connected and their size. 47
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 47
Subwoofer Phase Sets the phase of the subwoofer. 48
Extra Bass Enables/disables Extra Bass. 48
Virtual CINEMA FRONT Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. 48
Distance Sets the distance between each speaker and listening position. 48
Level Adjusts the volume of each speaker. 48
Equalizer Adjusts the tone with an equalizer. 48
Test Tone Enables/disables the test tone output. 49
HDMI Configuration
HDMI Control Enables/disables HDMI Control. 50
Audio Output Selects a device to output audio. 50
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 50
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 50
ARC Enables/disables ARC. 50
SCENE Enables/disables SCENE link playback. 51
Sound
DSP Parameter
Panorama Enables/disables the broadening effect of the front sound field. 52
Center Width Adjusts the broadening effect of the center sound field. 52
Dimension Adjusts the difference in level between the front and surround sound fields. 52
Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 52
Lipsync
Select Selects the method to adjust the delay between video and audio output. 52
Adjustment Adjusts the delay between video and audio output manually. 52
Volume
Scale Switches the scale of the volume display. 53
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 53
Max Volume Sets the maximum volume to prevent excessive loudness. 53
Initial Volume Sets the initial volume for when this receiver is turned on. 53
00_RX-V379_om_U.book Page 45 Tuesday, January 13, 2015 4:50 PM