Filter
Top Products
En 41
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option
menu items
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
• Default settings are underlined.
Configuring playback settings for different playback sources (Option menu)
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
VOL.
Input Select
Input Select
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info
Audio In
Option
Item Function Page
Input Select (Input) Switches the input source. 42
Tone Control (Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
42
DSP/Surround
(DSP/Surround)
Program (PRG) Select the sound programs and stereo playback. 32
Sur.Decode
(SrDec)
Select which surround decoder is used when
Sur.Decode is selected as the program.
33
DSP Level
(DSP Level)
Adjusts the sound field effect level. 42
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to minimum)
is automatically adjusted when the volume is adjusted.
42
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 42
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. 42
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume during playback. 42
Lipsync (Lipsync)
Enables/disables the “
Lipsync
” setting in the “
Setup
” menu.
43
Signal Info (Signal Info) Displays information about the video/audio signal. 43
Audio In (Audio)
Combines the video jack of the selected input
source with an audio jack of others.
43
Video Out (Video) Selects a video to be output with radio sounds. 43
FM Mode (FM Mode)
Switches between “
Stereo
” and “
Mono
” for FM radio reception.
35
Auto Preset (Auto Preset)
Automatically registers FM radio stations with strong
signals as presets.
36
Clear Preset (Clear Preset) Clear radio stations registered to preset numbers. 37
Traffic Program
(Traffic Program)
(U.K. and Europe models only)
Automatically searches for a traffic information station.
38
Pairing (Pairing)
Performs a pairing operation between the unit and
your BLUETOOTH device.
39
Connect/Disconnect
(Connect/Disconnect)
Connects/disconnects the BLUETOOTH device. 40
Input Interlock (Interlock)
Sets whether the input source automatically switches to
"
Bluetooth
" when a
BLUETOOTH
connection is established.
40
00_RX-V379_om_U.book Page 41 Tuesday, January 13, 2015 4:50 PM