Filter
Top Products
77
English
To Clear All Learned Functions
1 Select the kind of key functions all of which you want to clear by
using the MACRO switch on the side panel of the remote control
unit.
OFF: Select this position if you want to clear all of the learned
functions except macros.
QUICK: Select this position if you want to clear all of the macros
you made only.
SLOW: Select this position if you want to clear all of the learned
functions including macros.
2 Press the CLEAR button using the point of a mechanical pencil,
etc.
* If one of the following operation is made after you press the
CLEAR button, the TRANSMIT/LEARN indicator flashes
rapidly and the current mode is canceled. If this occurs, press
the CLEAR button again.
• MACRO switch is switched to another position.
• Another key is pressed.
• There is no operation for about 30 seconds.
3 Press and hold the CLEAR button again. While holding the
CLEAR button pressed, press and hold the MASTER VOLUME
and keys simultaneously until the indicator flashes 7 times.
MUTE
TRANSMIT
/LEARN
Flashes.
MACROQUICK
OFFSLOW
LEARNCLEAR MACRO
TRANSMIT
/LEARN
Flashes slowly.