Filter
Top Products
17
English
5 MEMORY Indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E switch
and the preset station number selector buttons.
6 AUTO TUNING Indicator
Lights up when this unit is in the automatic tuning mode.
7 ROOM 2 CONTROL Indicator
Lights up momentarily when the Room 2 remote control unit is
used in the second room.
8 SPEAKERS A/B Indicators
The indicator A or B which corresponds to the currently
selected main speakers lights up. If both main speakers A or B
are selected, both indicators light up.
9 STEREO Indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
0 Signal-level Meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
A Digital Audio Input Signal Indicators
When digital audio signals not encoded with the Dolby Digital
(AC-3) are input to this unit, “PCM DIGITAL” lights up.
When digital audio signals encoded with the Dolby Digital
(AC-3) are input to this unit, “ DIGITAL” lights up.
B DIGITAL, DSP and PRO LOGIC indicators
“ DIGITAL” lights up when the built-in Dolby Digital (AC-3)
Decoder is on and the signals of selected source encoded with
the Dolby Digital (AC-3) is not in 2-channels. “DSP” lights up
when the built-in digital sound field processor is on, and “
PRO LOGIC” lights up when the built-in Dolby Pro Logic
Surround Decoder is on. Depending on the selected DSP
program, both “ DIGITAL” and “DSP”, or both “DSP” and “
PRO LOGIC” will light up.
C SLEEP Indicator
Lights up while the built-in SLEEP timer is functioning.